News

Vancouver, Canada - Mawson Resources Limited ("Mawson") or (the "Company") (TSX:MAW) (Frankfurt:MXR) (PINKSHEETS: MWSNF) announces the latest drill results from the 100% owned Palokas gold discovery in Northern Finland.


Key Points:
  • 9.2 metres @ 3.2 g/t gold intersected from 82.0 metres in drill hole PRAJ0110 (40 metre down-dip step out);
  • 5.8 metres @ 6.2 g/t gold interested from 39.1 metres in drill hole PRAJ0111 (35 metre down-dip step out), including 1 metre @ 19.8 g/t gold from 42.1 metres.
  • Grades and thickness of gold mineralization are consistent with up-dip drilling results, with mineralization now drill tested from surface to greater than 100 metres in down-dip extent;
  • Mineralization remains open in all directions;
  • Drilling continues with the anticipated program until the end of October to be 12 holes for 600 metres;
  • Drill results coincide with a series of near surface geophysical anomalies and form part of a 3 kilometre target horizon within a broader district of gold mineralization discovered within a 100 km2 area between the Rompas and Rajapalot project areas;
  • Tests on Palokas drill core have demonstrated excellent gold extraction of between 95% and 99% (average 97%) from a combination of gravity separation and conventional cyanidation (see Mawson Press Release October 28 2014);
  • The Company will increase total drill capacity during winter with the aim to drill 6,000 to 8,000m with hand portable rigs, with the aim to be in a position to calculate the first mineral resource at Palokas in Q2 2016.

Mr. Hudson, President & CEO, states, "Latest drilling provides another set of solid results. Mineralization has now been discovered for greater than 100 metres down dip, and continues to show consistency of grade and thickness. Drilling continues and we look forward to releasing further drill results as they become available."

PRAJ0110 and PRAJ0111 were drilled 35-40m down-dip from known mineralization, making them the largest down-dip step outs completed to date at Palokas. PRAJ0110 recorded the greatest thickness of the overall mineralized package observed to date at Palokas with 23.3 metres @ 1.5g/t gold from 75.2 metres (no lower cut applied). Mineralization is now known to extend from surface to greater than 100 metres in dip extent and continues to show good consistency of grade and thickness:

Results immediately up dip from PRAJ00110 (9.2 metres @ 3.2 g/t gold from 82.0 metres) include:

  • 19.0m @ 5.3 g/t gold from 38.7 metres in PRAJ0109 (see Mawson Press Release September 01, 2015)
  • 19.6m @ 7.5 g/t gold from 18.1 metres in PRAJ0107 (see Mawson Press Release May 19, 2015)
  • 19.0m @ 2.3 g/t gold from 8.0 metres in PRAJ0022 (see Mawson Press Release January 20, 2014);
  • 19.5m @ 7.4 g/t gold from 1.3 metres in PRAJ0006 (See Mawson Press Release October 16, 2013)

Results immediately up dip from PRAJ00111 (5.8 metres @ 6.2 g/t gold from 39.1 metres) include:

  • 9.0m @ 10.2 g/t gold from 0 metres in PRAJ0003 (see Mawson Press Release October 03, 2013)
  • 8.3m @ 5.9 g/t gold from 2 metres in PRAJ0004 (see Mawson Press Release October 16, 2013)
  • 12.6m @ 3.6 g/t gold from 6.7 metres in PRAJ0005 (finished in mineralization) (see Mawson Press Release October 16, 2013);

The mineralized system at Palokas is hosted by a 20 metre thick, magnesium-enriched, pyrrhotite-bearing metasedimentary sequence that is sub-planar, dipping approximately 45 degrees to the west-northwest. Within this package, local structural controls on gold distribution are inferred to be responsible for grade distribution.

Drilling is undertaken with a Company-owned and operated, hand-portable, low impact Winkie drill rig, capable of drilling to depths of 120 metres. Drill holes will test below and along strike from known gold mineralization within an area of 600 metres along strike by up to 200 metres across strike. Drilling is ongoing and through the end of October the Company anticipates it will drill up to 12 holes for a total of 600 metres. The Company plans to drill 6,000-8,000 metres of diamond drill core with hand portable rigs during winter, when conditions allow for easier access over wetter areas.

Mawson, in conjunction with all environmental authorities, has completed and will continue biological baseline mapping of all areas where drilling and access will take place. The Company minimizes its environmental footprint, including the capture of all drill cuttings, reduction in total machine weight and the placement of walkways to reduce the impacts of foot traffic.

Cross section and plan views of the drill results are shown in Figures 1, 2 and 3, while Figure 4 shows a grade (g/t) x width (metre) longitudinal section. Tables 1 and 2 include collar and assay information. The true thickness of the mineralized interval is interpreted to be approximately 95% of the sampled thickness.

Technical and Environmental Background

Mawson's low-impact, hand-portable Winkie diamond core drill rig, manned by contract staff, was used for the program. Core sampling was undertaken by Mawson Staff who provided EW (25.2 mm) diameter core. Core recoveries were excellent and average close to 100% in fresh rock. After photographing and logging, core intervals averaging 1 metre in length were cut in half at the Geological Survey of Finland (GTK) core facilities in Rovaniemi, Finland. These half-core one metre samples weigh less than 0.7 kilograms. The remaining half core is retained on site for verification and reference purposes. Analytical samples were transported by Mawson personnel from site to the CRS Limited facility in Kempele, Finland. Samples were prepared at Kempele and analyzed for gold at Raahe using the PAL1000 technique which involves grinding the sample in steel pots with abrasive media in the presence of cyanide, followed by measuring the gold in solution with flame AAS equipment. The QA/QC program of Mawson consists of the systematic insertion of certified standards of known gold content, and blanks at the within interpreted mineralized rock. In addition, CRS inserts a number of blanks and standards into the analytical process.

The qualified person for Mawson's Finnish projects, Mr Michael Hudson, President & CEO for Mawson and Fellow of the Australasian Institute of Mining Metallurgy has reviewed and verified the contents of this release.

About Mawson Resources Limited (TSX:MAW, FRANKFURT:MXR, PINKSHEETS:MWSNF)

Mawson Resources Limited is an exploration and development company. Mawson has distinguished itself as a leading Nordic Arctic exploration company with a focus on the flagship Rompas and Rajapalot gold projects in Finland.

On behalf of the Board,

"Michael Hudson"
Michael Hudson, President & CEO

Investor Information
www.mawsonresources.com
1305 -- 1090 West Georgia St., Vancouver, BC, V6E 3V7
Noora Raasakka (Finland), Environmental Leader, +35 850 521 3515,
nraasakka@mawson.fi
Mariana Bermudez (Canada), Corporate Secretary, +1 (604) 685 9316,
info@mawsonresources.com

Forward-Looking Statement

This news release contains forward-looking statements or forward-looking information within the meaning of applicable securities laws (collectively, "forward-looking statements"). All statements herein, other than statements of historical fact, are forward-looking statements. Although Mawson believes that such statements are reasonable, it can give no assurance that such expectations will prove to be correct. Forward-looking statements are typically identified by words such as: believe, expect, anticipate, intend, estimate, postulate, and similar expressions, or are those, which, by their nature, refer to future events. Mawson cautions investors that any forward-looking statements are not guarantees of future results or performance, and that actual results may differ materially from those in forward-looking statements as a result of various factors, including, but not limited to, capital and other costs varying significantly from estimates, changes in world metal markets, changes in equity markets, planned drill programs and results varying from expectations, delays in obtaining results, equipment failure, unexpected geological conditions, local community relations, dealings with non-governmental organizations, delays in operations due to permit grants, environmental and safety risks, and other risks and uncertainties disclosed under the heading "Risk Factors" in Mawson's most recent Annual Information Form filed on www.sedar.com. Any forward-looking statement speaks only as of the date on which it is made and, except as may be required by applicable securities laws, Mawson disclaims any intent or obligation to update any forward-looking statement, whether as a result of new information, future events or results or otherwise.

Table 1: Collar Information from drilling at the Palokas Prospect

HoleID UTME UTMN Azimuth Dip Overburden Depth (m) Depth (m)
PRAJ0109 3408656 7373859 116 -60 2.1 71.7
PRAJ0110 3408620 7373877 116 -60 3.8 100.1
PRAJ0111 3408648 7373848 116 -60 4.4 71.8

 

Table 2: Bulk weighted assay data from the Palokas Prospect for Aug-Nov 2015 drill program

Hole ID Depth From (m) Depth To (m) Width (m) Au g/t Date Reported
PRAJ0109 33.05 34.35 1.3 0.7 Sept 01, 2015
PRAJ0109 38.7 57.7 19 5.3 Sept 01, 2015
PRAJ0110 76.55 78.65 2.1 0.6 Here
PRAJ0110 79.65 80.65 1.0 0.6 Here
PRAJ0110 82 91.2 9.2 3.2 Here
PRAJ0110 94.3 95.3 1.0 0.5 Here
PRAJ0110 97.3 98.45 1.15 0.5 Here
PRAJ0111 30.3 32.4 2.1 1.4 Here
PRAJ0111 39.1 44.9 5.8 6.1 Here
PRAJ0111 59.9 60.9 1.0 0.7 Here